Qubo® Epoxidharz vereint Eleganz und Funktionalität zu einem System. Für die verschiedenen Einsatzgebiete gibt es unterschiedliche Harze. Vom Industrieboden über 3D Boden bis zum Marmorlook und Böden mit Metallic-Effekt ist so alles möglich.
There is an increasing demand for solid, seamless, and durable solutions in new buildings and existing properties. Property owners often opt for epoxy coatings. Not only do they look elegant in bathrooms, but they also offer impressive benefits. The smooth surface of EP flooring is hygienic and easy to keep clean.
The synthetic resin layer not only provides reliable sealing, but also prevents water damage in your home.
The system is also used to create floors with a three-dimensional effect. Pigments are added for this purpose, which are spread artistically in streaks using a squeegee. Marbled surfaces can also be created in this way.
The coating can also be used to apply a sealant to existing tiles, parquet and laminate to protect them from scratches.
It has long been known that epoxy floors are the first choice in the commercial sector for floors in showrooms, warehouses and assembly halls or stores. Now that they have found their way into private homes, they are becoming increasingly popular. Thanks to the special properties of the material, beautiful effects can also be achieved in living areas. The different variants allow the epoxy resin floor to be individually adapted to the interior design in the living room or bedroom. Such a coating is the highlight of the entire house, which is both functional and visually impressive.
Concrete floors in garages and cellars are usually not very visually appealing. On the one hand, these are susceptible to breakage and stains. Due to their lack of impermeability, they cannot provide long-term protection against moisture and the associated consequential damage. On the other hand, they hardly offer the opportunity to adequately showcase a well-maintained vehicle or a well-equipped workbench.
Our 2K epoxy resin floors can be used to create a completely waterproof floor coating. This is robust and hard-wearing so that it can also withstand the stress of traffic.
The hard-wearing synthetic resin coatings are ideal for surfaces used in trade and industry. Heavy machinery and heavy-duty shelving can be placed on them without hesitation. The synthetic resin floors are the ideal solution for storage rooms, laboratories and industrial halls, as epoxy makes the surface resistant to dust and chemicals.
When using pallet trucks and forklifts, the smooth, even surface makes it easier to load and unload transporters and shelves with pinpoint accuracy.
The low build-up height of the resin coating makes it easier to avoid hard transitions between areas with different floor coverings.
Design and functionality don’t have to be mutually exclusive! Even in industrial areas, a color on the floor that matches the company has a completely different effect than the dull grey of old, cracked concrete floors.
With a Qubo® epoxy industrial floor, you can divide different production areas with colors, mark paths and storage areas, indicate emergency exits – the possibilities are extensive. The desired color can be determined according to RAL numbers, which, in addition to the large selection, also ensures safety when planning construction projects.
You benefit from the comprehensive advantages of Qubo® industrial floors made of epoxy resin:
For many people today, an epoxy resin table is part of the modern living ambience. The combination of natural wood with epoxy in the design of your choice is an absolute eye-catcher in living and dining rooms.
Our carpenters manufacture rivertables exactly to your specifications. Use our configurator and get your individual quote. You can find instructions and materials for a do-it-yourself epoxy table in our “Things to know” section.
Concrete look is a style that is characterized by its...
READ MORE
Using an epoxy garage floor has proven to be an...
READ MORE
More and more builders are opting for alternatives to tiles...
READ MOREOur Qubo® Resin epoxy resin flooring generally consists of at least two layers. The bottom layer is the same for all types of construction and consists of a primer in the desired floor color, which evens out any unevenness. The actual design layer is applied to this now even base.
With colored epoxy flooring, this is the pigmented epoxy resin. In addition to the desired color, the design layer can be enhanced with special pigments and effects. A pigmented epoxy resin floor with a glossy surface is already laid at this point.
To give the surface a matt look or a silky matt finish, a suitable sealant can be applied at the end.
With the 3D floor, the photo film is fixed after priming. The final top layer is then poured using the transparent resin.
Each of the applied layers can be walked on after a curing time of 24 hours. Depending on the existing substrate, additional preparation steps may be necessary so that the finished floor can be fully walked on after 3-4 days. The epoxy resin is fully cured and can withstand maximum loads after 7 days.
In general, conventional screed floors are suitable as a substrate for our Qubo® epoxy resin. Existing tiles can also be reworked if they are pre-treated accordingly.
A coating made of Qubo® epoxy resin is characterized by its extremely low installation height of only 2-3 mm.
In principle, a large selection of colors can be made available on customer request. The design options are extended by the possibility of sprinkling in particles for metallic and glitter effects and mixing color pigments with each other.
No, all Qubo® Resin flooring systems are solvent-free.
An epoxy resin floor is created in three steps, each of which is followed by a day of drying time. On the first day, the substrate is prepared and provided with a primer layer. The decorative layer is applied on the second day. The sealing follows on the third day.
The final step in creating a floor is the application of the seal. This seal can also be made slip-resistant. For special requirements regarding the slip resistance class, simply contact us in advance.
The even surface and the resistant material give dirt no chance to penetrate the floor. This means that dirt can simply be wiped off the surface and liquids absorbed. This applies to epoxy floors in living areas as well as utility areas in cellars and garages.
In general, mild household cleaners should be used to clean Qubo® Resin floors and aggressive cleaning agents should be avoided. The latter should not only be used with caution in terms of health, they can also cause lasting damage to the surface of the flooring system.
Once the material has fully cured and chemically set, the epoxy resin floor is completely waterproof. This means that the system is also suitable for use in wet areas.
The Qubo® epoxy resin flooring systems are available in several versions with different areas of application.
Qubo® Resin floors are used to create surfaces that combine attractiveness and durability. The materials in this series are used to create the familiar 3D floors with three-dimensional photo foils as well as pigmented coatings with a concrete look and many other desired colors and effects.
The Qubo® EP07 is a system specially developed for industrial use, which allows thin, particularly robust coatings in the desired color for areas subject to extreme stress.
Ja, sowohl unser Qubo® Resin als auch unser Qubo® EP07 sind für den Einsatz in Garagen geeignet. Für eine ausführliche Beratung zur Auswahl des passenden Systems stehen wir Ihnen gern für ein persönliches Gespräch zur Verfügung. Sprechen Sie uns einfach an.
Details and facts, key figures and explanations – here you will find answers to frequently asked questions about our Qubo® coating systems. If any details remain unclear, simply contact us. We will be happy to advise you personally and promptly.
Where we work
Menu
We have been your contact for stone carpets and epoxy resin-based coating systems for over 20 years. From our company headquarters in Meinerzhagen, we supply our partners in the trade and our customers in the commercial and private sectors throughout Europe with products of the Qubo® quality brand.
